Nuke Performance Black Nylon PTFE Stainless Braided Fuel Hose. Available in AN-6, AN-8, AN-10, and AN-12. High quality, lightweight, full flow fuel hose for PTFE hose ends.
Nuke Performance offers a wide range of PTFE hose ends and fuel hoses. With the PTFE lineup, you get a perfect solution for all types of fuels, including alcoholic fuels such as ethanol.
- Safe for all type of fuels, including ethanol
- For Nuke Performance Full-Flow PTFE hose ends
- Available in AN-6 / AN-8 / AN-10 AN-12
- Available in pre-cut lengths of 1 / 2 / 4 / 6 m
- A number of heat shrink sleeves included
- Much longer life span than an ordinary fuel hose
The wide selection of hose ends from Nuke Performance is of the highest possible quality and is available in AN-6 to AN-12 size and in a variety ranging from straight to 180-degree versions. The Full-Flow PTFE fuel hose works as inexpensive insurance for your injectors, filters, and fuel pumps.
Nuke Performance PTFE Hose End / Fuel Hose Specifications
| AN-6 Hose Series # | 820-02-106 - 820-02-606 |
| AN-6 Hose Ends # | 810-01-106 - 810-18-106 |
| Available Sizes | AN-6 / AN-8 / AN-10 / AN-12 |
| Fuel Hose Length | 1m (≈3ft) / 2m (≈6ft) / 4m (≈13ft) / 6m (≈20ft) |
| Fuel Compatibility | Gasoline, Methanol, Ethanol, E85, Racefuel, Diesel, Oil |
| Heat Shrinks Included | 1m=2pcs / 2m=2pcs / 4m=4pcs / 6m=4pcs |
| Fuel Hose Inner Liner | PTFE (Teflon) inner liner |
| Fuel Hose Braiding | Stainless steel and nylon |
| Temperature Range | -70°C to 250°C (-94°F to 480°F) |
| Conductive Inner Liner | YES |
| For Motorsport Use | YES |
| AN6 Operating Pressure |
205 BAR (3000 PSI) |
| AN6 Burst Pressure | 680 BAR (10000 PSI) |
| AN6 Inner Diameter | 8.2mm (0.32") |
| AN6 Outer Diameter | 11.5mm (0.44") |
Download User Manual (.pdf)