Wireless Wheel Controls - 10 Channel (8 Switch + 2 Rotary + 2 Paddles)

10-channel  (8 Switch + 2 Rotary + 2 Paddles) system with Easyfit Transmitter which bolts straight onto your steering wheel hub and fits all standard bolt patterns on 6 x 70mm, 6 x 74mm and 3 x 50.8mm PCD steering wheels. 

Kit Includes:

• Easyfit Transmitter and 2 paddle switches assembled to a button plate with 6 soldered pushbuttons and 2 soldered MIL-spec calibration switches all fitted with bespoke nut covers
• Battery
• Decal sheet
• Receiver with AMPSEAL connector
• Wiring Harness
• USB cable
• Installation instructions
  
• Optional 120 Ohm CAN Termination Resistor included.

Wireless Module Types:

Solid State:

• Full solid-state low-side switching via pushbuttons of six 600mA loads, such as standard automotive relays, with built-in short circuit and overcurrent protection.
  
• Two analogue channels for wireless potentiometer control such as Launch, Traction, Boost Control and many more
• Two low-side solid-state switching channels for left and right hand paddle switches with a choice of lever designs.
• Optional CAN Interface output for seamless PDM/ECU or Dash Display integration. We can supply the kit with many different CAN Presets to suit Ecumaster, Link ECU, MaxxECU, Haltech and more. 
  
• Includes a rainlight function, perfect for racing with dual solid light and 4Hz flashing hazard modes, and Flash-to-Pass to give a 2-second 4Hz headlight flash.
  
• Choose any combination of smart headlight, smart indicator, IVA fog light and rainlight modes or momentary and latching behaviour for each solid state channel.
• The Receiver measures 86 x 55 x 35mm and weighs 285g.
• At just 176 x 154 x 19-29mm, the fully assembled transmitter complete with paddle switches (width 275mm) weighs just 415g including the battery!
  

Channel CAN Only:

• Full solid-state low-side switching via pushbuttons of six 600mA loads, such as standard automotive relays, with built-in short circuit and overcurrent protection.
  
• Two analogue channels for wireless potentiometer control such as Launch, Traction, Boost Control and many more
• Two low-side solid-state switching channels for left and right hand paddle switches with a choice of lever designs.
• Seamless PDM/ECU or Dash Display integration. We can supply the kit with many different CAN Presets to suit Ecumaster, Link ECU, MaxxECU, Haltech and more. 
  
• Includes a rainlight function, perfect for racing with dual solid light and 4Hz flashing hazard modes, and Flash-to-Pass to give a 2-second 4Hz headlight flash.
  
• Choose any combination of smart headlight, smart indicator, IVA fog light and rainlight modes or momentary and latching behaviour for each solid state channel.
• The Receiver measures 86 x 55 x 35mm and weighs 112g.
• At just 176 x 154 x 19-29mm, the fully assembled transmitter complete with paddle switches (width 275mm) weighs just 415g including the battery!
  

Come with Touring Paddles. If Compact Paddles are required please let us know.

Need a matching Steering Wheel, Boss Kit and Quick Release? Check out our Steering Wheels HERE and accessories HERE