Wireless Wheel Controls - 10 Channel (8 Switch + 2 Rotary)

10-channel (8 Switch +2 Rotary) system with Easyfit Transmitter which bolts straight onto your steering wheel hub and fits all standard bolt patterns on 6 x 70mm, 6 x 74mm and 3 x 50.8mm PCD steering wheels. 

Kit Includes:

• Easyfit Transmitter assembled to button plate with 8 soldered pushbuttons and 2 soldered Mil-spec calibration switches all fitted with bespoke nut covers
• Battery
• Decal sheet
• Receiver with AMPSEAL connector
• Wiring Harness
• USB cable
• Installation instructions
• Optional 120 Ohm CAN Termination Resistor included.

Wireless Module Types:

Solid State:

• Full solid-state low-side switching of up to ten, 600mA loads, such as standard automotive relays, with built-in short circuit and overcurrent protection and endless re-configuration possibilities, using the included free programming software.
  
• Two analogue channels for wireless potentiometer control such as Launch, Traction, Boost Control and many more
• Optional CAN Interface output for seamless PDM/ECU or Dash Display integration. We can supply the kit with many different CAN Presets to suit Ecumaster, Link ECU, MaxxECU, Haltech and more. 
  
• Includes a rainlight function, perfect for racing with dual solid light and 4Hz flashing hazard modes, and Flash-to-Pass to give a 2-second 4Hz headlight flash.
  
• Choose any combination of smart headlight, smart indicator, IVA fog light and rainlight modes or momentary and latching behaviour for each solid state channel.
• The Receiver measures 86 x 55 x 35mm and weighs 285g.
• At just 176 x 154 x 19-29mm, the fully assembled transmitter and button plate weigh just 240g including the battery!
  

CAN Only:

• Full low-side switching of up to ten, 600mA loads all via CAN with endless re-configuration possibilities, using the included free programming software.
  
• Two analogue channels for wireless potentiometer control such as Launch, Traction, Boost Control and many more
• Seamless PDM/ECU or Dash Display integration. We can supply the kit with many different CAN Presets to suit Ecumaster, Link ECU, MaxxECU, Haltech and more. 
  
• Includes a rainlight function, perfect for racing with dual solid light and 4Hz flashing hazard modes, and Flash-to-Pass to give a 2-second 4Hz headlight flash.
  
• Choose any combination of smart headlight, smart indicator, IVA fog light and rainlight modes or momentary and latching behaviour for each solid state channel.
• The Receiver measures 86 x 55 x 35mm and weighs 112g.
• At just 176 x 154 x 19-29mm, the fully assembled transmitter and button plate weigh just 240g including the battery!
  

Need a matching Steering Wheel, Boss Kit and Quick Release? Check out our Steering Wheels HERE and accessories HERE

After you place your order, we will contact you to confirm your pushbutton colour choice and layout.