Nuke Performance Black Nylon PTFE Stainless Braided Fuel Hose. Available in AN-6, AN-8, AN-10, and AN-12. High quality, lightweight, full flow fuel hose for PTFE hose ends.
Nuke Performance offers a wide range of PTFE hose ends and fuel hoses. With the PTFE lineup, you get a perfect solution for all types of fuels, including alcoholic fuels such as ethanol.
- Safe for all type of fuels, including ethanol
- For Nuke Performance Full-Flow PTFE hose ends
- Available in AN-6 / AN-8 / AN-10 AN-12
- Available in pre-cut lengths of 1 / 2 / 4 / 6 m
- A number of heat shrink sleeves included
- Much longer life span than an ordinary fuel hose
The wide selection of hose ends from Nuke Performance is of the highest possible quality and is available in AN-6 to AN-12 size and in a variety ranging from straight to 180-degree versions. The Full-Flow PTFE fuel hose works as inexpensive insurance for your injectors, filters, and fuel pumps.
Nuke Performance PTFE Hose End / Fuel Hose Specifications
AN-8 Hose Series # | 820-02-108 - 820-02-608 |
AN-8 Hose Ends # | 810-01-108 - 810-18-108 |
Available Sizes | AN-6 / AN-8 / AN-10 / AN-12 |
Fuel Hose Length | 1m (≈3ft) / 2m (≈6ft) / 4m (≈13ft) / 6m (≈20ft) |
Fuel Compatibility | Gasoline, Methanol, Ethanol, E85, Racefuel, Diesel, Oil |
Heat Shrinks Included | 1m=2pcs / 2m=2pcs / 4m=4pcs / 6m=4pcs |
Fuel Hose Inner Liner | PTFE (Teflon) inner liner |
Fuel Hose Braiding | Stainless steel and nylon |
Temperature Range | -70°C to 250°C (-94°F to 480°F) |
Conductive Inner Liner | YES |
For Motorsport Use | YES |
AN8 Operating Pressure |
170 BAR (2500 PSI) |
AN8 Burst Pressure | 550 BAR (8000 PSI) |
AN8 Inner Diameter | 10.6mm (0.42") |
AN8 Outer Diameter | 12.7mm (0.50") |
Download User Manual (.pdf)