8-channel system with Easyfit Transmitter which bolts straight onto your steering wheel hub and fits all standard bolt patterns on 6 x 70mm, 6 x 74mm and 3 x 50.8mm PCD steering wheels.
Kit Includes:
- Easyfit Transmitter assembled to button plate with 8 soldered pushbuttons and covers
- Battery
- Decal sheet
- Receiver with AMPSEAL connector
- Wiring Harness
- USB cable
- Installation instructions
- Optional 120 Ohm CAN Termination Resistor included.
Wireless Module Types:
Relay:
- Control up to 8 channels with endless re-configuration possibilities, using the included free programming software.
- Includes internal relays rated to 15A at 12V and can be used for high- or low-side switching of loads.
- Optional CAN Interface output for seamless PDM/ECU or Dash Display integration. We can supply the kit with many different CAN Presets to suit Ecumaster, Link ECU, MaxxECU, Haltech and more.
- Choose any combination of smart headlight, smart indicator and IVA fog light modes or momentary and latching behaviour for each channel.
- The 8 Relay Receiver measures 121 x 66 x 40mm and weighs 385g.
- At just 176 x 154 x 19-29mm, the fully assembled transmitter and button plate weigh just 220g including the battery!
- Optional 120 Ohm CAN Termination Resistor included.
Solid State:
- Full solid-state low-side switching of up to eight, 600mA loads, such as standard automotive relays, with built-in short circuit and overcurrent protection and endless re-configuration possibilities, using the included free programming software.
- Two analogue channels for wireless potentiometer control such as Launch, Traction, Boost Control and many more
- Optional CAN Interface output for seamless PDM/ECU or Dash Display integration. We can supply the kit with many different CAN Presets to suit Ecumaster, Link ECU, MaxxECU, Haltech and more.
- Includes a rainlight function, perfect for racing with dual solid light and 4Hz flashing hazard modes, and Flash-to-Pass to give a 2-second 4Hz headlight flash.
- Choose any combination of smart headlight, smart indicator, IVA fog light and rainlight modes or momentary and latching behaviour for each solid state channel.
- The Receiver measures 86 x 55 x 35mm and weighs 285g.
- At just 176 x 154 x 19-29mm, the fully assembled transmitter and button plate weigh just 220g including the battery!
CAN Only:
- Full low-side switching of up to eight, 600mA loads all via CAN with endless re-configuration possibilities, using the included free programming software.
- Two analogue channels for wireless potentiometer control such as Launch, Traction, Boost Control and many more
- Seamless PDM/ECU or Dash Display integration. We can supply the kit with many different CAN Presets to suit Ecumaster, Link ECU, MaxxECU, Haltech and more.
- Includes a rainlight function, perfect for racing with dual solid light and 4Hz flashing hazard modes, and Flash-to-Pass to give a 2-second 4Hz headlight flash.
- Choose any combination of smart headlight, smart indicator, IVA fog light and rainlight modes or momentary and latching behaviour for each solid state channel.
- The Receiver measures 86 x 55 x 35mm and weighs 112g.
- At just 176 x 154 x 19-29mm, the fully assembled transmitter and button plate weigh just 220g including the battery!
Need a matching Steering Wheel, Boss Kit and Quick Release? Check out our Steering Wheels HERE and accessories HERE
| Configuration Software: |
| Configuration_Software |
| Windows Driver |
| Wireless Module Instructions: |
| Relay |
| Solid State |
|
CAN |
| CAN Protocol Downloads: |
| AiM PDM |
|
Ecumaster |
| Kvaser |
| Product Drawings: |
|
Button Plate Type 1 |
| Button Plate Type 2 |
| Button Plate Type 3 |