Wireless Wheel Controls - 2 Channel Paddles

2-channel wireless paddle switch system which bolts straight onto your steering wheel hub and fits all standard bolt patterns on 6 x 70mm, 6 x 74mm and 3 x 50.8mm PCD steering wheels. 

Kit Includes:

• Wireless paddle Transmitter assembled to carbon fibre plate with 2 soldered paddle switches
• Pair of carbon fibre levers
• Battery
• Decal sheet
• 2-channel receiver with AMPSEAL connector
• Harness
• USB cable
• Installation instructions
• Optional 120 Ohm CAN Termination Resistor included.

Wireless Module Types:

Solid State:

• Full solid-state low-side switching of up to two, 600mA loads, such as standard automotive relays, with built-in short circuit and overcurrent protection and endless re-configuration possibilities, using the included free programming software.
  
• Two paddle switches with potted contacts and two sets of magnets to adjust the pull feel.
  
• Optional CAN Interface output for seamless PDM/ECU or Dash Display integration. We can supply the kit with many different CAN Presets to suit Ecumaster, Link ECU, MaxxECU, Haltech and more. 
  
• Includes a rainlight function, perfect for racing with dual solid light and 4Hz flashing hazard modes, and Flash-to-Pass to give a 2-second 4Hz headlight flash.
  
• Choose any combination of smart headlight, smart indicator, IVA fog light and rainlight modes or momentary and latching behaviour for each solid state channel.
• 2 Relay Receiver measures 121 x 66 x 40mm and weighs 300g and that includes custom wiring harness and connector.
• At just 250 - 300 x 154 x 23mm, the fully assembled transmitter wireless paddle system weighs just 260g including the battery!
  

CAN Only:

• Full low-side switching of up to two, 600mA loads all via CAN with endless re-configuration possibilities, using the included free programming software.
  
• Two paddle switches with potted contacts and two sets of magnets to adjust the pull feel.
  
• Seamless PDM/ECU or Dash Display integration. We can supply the kit with many different CAN Presets to suit Ecumaster, Link ECU, MaxxECU, Haltech and more. 
  
• Includes a rainlight function, perfect for racing with dual solid light and 4Hz flashing hazard modes, and Flash-to-Pass to give a 2-second 4Hz headlight flash.
  
• Choose any combination of smart headlight, smart indicator, IVA fog light and rainlight modes or momentary and latching behaviour for each solid state channel.
• 2 Relay Receiver measures 121 x 66 x 40mm and weighs 300g and that includes custom wiring harness and connector.
• At just 250 - 300 x 154 x 23mm, the fully assembled transmitter wireless paddle system weighs just 260g including the battery!
  

Need a matching Steering Wheel, Boss Kit and Quick Release? Check out our Steering Wheels HERE and accessories HERE